z axis造句

• Since we can't specify lx and ly, the vector l can lie anywhere on the surface of a cone whose axis is the z axis .
  由于不能确定Lx和Ly，矢量L可以处于以Z轴为轴的圆锥体面上任意处。
• Z axis 10 section auto - refining processing function
  轴10段自动修细加工功能。
• X axis has often a different focus from z axis one ( tools rake )
  轴和z轴分别有一个聚焦条显示。
• The + z axis should be the “ up ” axis
  轴正方向作为上方。
• Z axis positioning accuracy z
  轴定位精确度
• Stepping motor z axis
  高速变频马达z axis
• Z axis input
  Z轴调变功能
• 1 keep the same settings as 5 . 3 , but change block 2 length to 40 and set the z axis rotation to 23 degrees
  1维持如5 . 3相同的设定，但改变区块2的长度到40 ，并且设定z轴旋转23度。
• Since we can ' t specify lx and ly , the vector l can lie anywhere on the surface of a cone whose axis is the z axis
  由于不能确定lx和ly ，矢量l可以处于以z轴为轴的圆锥体面上任意处。
• Now move the selected cvs to 1 . 433 of z axis ( fig 9 ) , you can see the cvs ' axis value in the cvs panel ( right side )
  将它们在z轴方向上移动约1 . 433的距离，你可以在右边通道栏里看到数值
• The z axis is provided with zero output to facilitate the setting and changing of electrical charging depth if installed with optical ruler
  若加装光学尺z轴具有零点输出功能放电深度的设定及变更容易。
• Z test conditions of machining centres . part 1 : geometric tests for machines with horizontal spindle and with accessory heads horizontal z axis
  加工中心.检验条件.第1部分:卧式和带附加主轴头机床几何精度检验
• The resolution of the z axis is dependent on the model of microscope as they all have differing distances per turn of the focus knob
  轴分辨率取决于显微镜的型号，因为每种显微镜聚焦钮的移动距离是不同的。
• The stroke of our machines is x axis 300mm ; y axis 200mm , z axis 300mm , which allows us to perform processing on small and medium - size work pieces
  机械冲程为x轴300mm y轴200mm z轴300mm ,可承接小中型尺寸工件加工。
• Z test conditions of precision machining centres . part 1 : geometric tests for machines with horizontal spindle and with accessory heads horizontal z axis
  精密加工中心.检验条件.第1部分:卧式和带附加主轴头机床几何精度检验
• Z test conditions of machining centres . part 1 : geometric tests for machines with horizontal spindle and with accessory heads horizontal z axis
  多工序数控加工中心的试验条件.第1部分:带水平主轴和辅助头的机床的几何尺寸试验
• The actual shape ( typeface ) attribute ( the z axis ) is for differences of type design ( the actual shape used in imaging ) of each variant form
  实用形（字样）特质（ z轴）表示的是某一字的某一变体在具体字样（字型）中形态上的差异。
• The motor controller and software can also drive an optional z axis or focus motor which can be fitted to the fine focus knob of most of the newer microscopes
  电机控制器和软件也可以驱动z轴或聚焦电机，聚焦电机可以安装到最新显微镜的细调旋钮上。
• The z axis adopts the high precise linear track by swiss schneeberger and the high sensible servo - motor by japanese sanyo , which is provided with an excellent rigidity
  轴使用瑞士schneeberger高精度线性滑轨配合日本sanyo高灵敏度伺服马达精度高，刚性佳。
• Rotary tool turret with 12 vdi rotary tool position is prepared for any rotary tools for x axis and z axis , which are used for milling , boring and tapping
  回转刀塔的刀盘提供了12个vdi旋转刀具的安装位，允许在刀盘的任意刀位上安装x向或z向的旋转刀具。从而实现铣、钻、攻丝等加工功能。